The Nissan March C+C (K12), marketed in some regions as the Nissan Micra Convertible, was a unique offering in the early 2000s – a subcompact convertible. Produced between 2005 and 2010, it represented Nissan’s attempt to capitalize on the growing demand for affordable, fun-to-drive small cars, particularly in the European market. The “C+C” designation stood for “Compact Coupe,” though its fully retractable hardtop distinguished it from traditional soft-top convertibles. This variant, the 1.6 16V producing 110 horsepower, occupied a mid-range position within the K12 lineup, offering a balance between performance and economy. It was positioned above the base 1.4-liter engine and below any potential performance-oriented trims, appealing to buyers seeking a more spirited driving experience than the entry-level models provided.
Technical Specifications
| Brand | Nissan |
| Model | March |
| Generation | March C+C (K12) |
| Type (Engine) | 1.6 16V (110 Hp) |
| Start of production | 2005 |
| End of production | 2010 |
| Powertrain Architecture | Internal Combustion engine |
| Body type | Cabriolet |
| Seats | 4 |
| Doors | 2 |
| Fuel consumption (urban) | 8.7 l/100 km (27 US mpg, 32.5 UK mpg, 11.5 km/l) |
| Fuel consumption (extra urban) | 5.6 l/100 km (42 US mpg, 50.4 UK mpg, 17.9 km/l) |
| Fuel Type | Petrol (Gasoline) |
| Acceleration 0 – 100 km/h | 10.6 sec |
| Acceleration 0 – 62 mph | 10.6 sec |
| Acceleration 0 – 60 mph | 10.1 sec |
| Maximum speed | 191 km/h (118.68 mph) |
| Weight-to-power ratio | 10.5 kg/Hp, 95.7 Hp/tonne |
| Weight-to-torque ratio | 7.5 kg/Nm, 133 Nm/tonne |
| Power | 110 Hp @ 6000 rpm |
| Power per litre | 68.8 Hp/l |
| Torque | 153 Nm @ 4400 rpm (112.85 lb.-ft. @ 4400 rpm) |
| Engine layout | Front, Transverse |
| Engine Model/Code | XH1 |
| Engine displacement | 1598 cm3 (97.52 cu. in.) |
| Number of cylinders | 4 |
| Engine configuration | Inline |
| Cylinder Bore | 78 mm (3.07 in.) |
| Piston Stroke | 83.6 mm (3.29 in.) |
| Compression ratio | 10.7:1 |
| Number of valves per cylinder | 4 |
| Fuel injection system | Multi-port manifold injection |
| Engine aspiration | Naturally aspirated engine |
| Valvetrain | DOHC |
| Kerb Weight | 1150 kg (2535.32 lbs.) |
| Max. weight | 1540 kg (3395.12 lbs.) |
| Max load | 390 kg (859.8 lbs.) |
| Trunk (boot) space – minimum | 255 l (9.01 cu. ft.) |
| Trunk (boot) space – maximum | 457 l (16.14 cu. ft.) |
| Fuel tank capacity | 46 l (12.15 US gal, 10.12 UK gal) |
| Length | 3808 mm (149.92 in.) |
| Width | 1668 mm (65.67 in.) |
| Height | 1441 mm (56.73 in.) |
| Wheelbase | 2432 mm (95.75 in.) |
| Front track | 1460 mm (57.48 in.) |
| Rear (Back) track | 1448 mm (57.01 in.) |
| Drivetrain Architecture | The Internal combustion engine (ICE) drives the front wheels of the vehicle. |
| Drive wheel | Front wheel drive |
| Number of gears and type of gearbox | 5 gears, manual transmission |
| Front suspension | Independent coil spring |
| Rear suspension | Independent coil spring |
| Front brakes | Disc |
| Rear brakes | Drum |
| Assisting systems | ABS (Anti-lock braking system) |
| Tires size | 185/50R16 |
INTRODUCTION
The Nissan March C+C (K12) 1.6 16V, launched in 2005, was a distinctive addition to Nissan’s European lineup. Built on the K12 platform – also underpinning the standard March/Micra hatchback – the C+C differentiated itself with its electrically retractable hardtop. This feature allowed it to compete with other small convertibles like the Fiat Grande Punto Cabrio and the Renault Wind, offering open-air motoring with the added security and weather protection of a solid roof. The 1.6-liter engine variant aimed to provide a more engaging driving experience than the base 1.4-liter, appealing to buyers who wanted a bit more power for highway cruising and spirited driving. Production continued until 2010, with the model primarily targeted towards the European market, where small convertibles enjoyed considerable popularity.
Powertrain & Engine Architecture
At the heart of the March C+C 1.6 16V lies the XH1 engine, a 1.6-liter inline-four cylinder gasoline engine. This engine, part of Nissan’s MR series, featured a double overhead camshaft (DOHC) valvetrain with four valves per cylinder, contributing to its relatively high output for its displacement. Fuel delivery was handled by a multi-port fuel injection system, optimizing fuel atomization and combustion efficiency. The engine produced 110 horsepower at 6000 rpm and 153 Nm (112.85 lb-ft) of torque at 4400 rpm. The engine’s design prioritized fuel efficiency and smooth operation over outright performance. The transmission paired with this engine was a 5-speed manual gearbox. While an automatic transmission was available on other K12 March models, the 1.6L variant was primarily offered with the manual, likely to enhance the driving experience and appeal to enthusiasts.
Driving Characteristics
The 1.6-liter engine in the March C+C provided a noticeable improvement in performance compared to the 1.4-liter base model. Acceleration from 0 to 60 mph took approximately 10.1 seconds, and it could reach a top speed of 118.68 mph. While not a sports car, the 1.6L offered sufficient power for comfortable highway cruising and overtaking maneuvers. The 5-speed manual transmission allowed drivers to effectively utilize the engine’s powerband. The gear ratios were tuned for a balance between acceleration and fuel economy. Compared to a hypothetical higher-output version, the 1.6L prioritized usability and fuel efficiency. The car’s relatively light weight (1150 kg / 2535 lbs) helped to offset the modest power output, resulting in a reasonably nimble driving experience. However, the convertible body style did introduce some structural flex, noticeable on uneven road surfaces.
Equipment & Trim Levels
The March C+C 1.6 16V typically came equipped with a reasonable level of standard features. These included power steering, central locking, electric front windows, and an audio system. Safety features such as ABS (Anti-lock Braking System) were also standard. Interior upholstery was typically cloth, with a relatively simple and functional dashboard layout. Optional extras included air conditioning, alloy wheels, and a more advanced audio system with CD player. The trim level was generally considered mid-range, offering a step up in features and performance from the base models without venturing into premium territory. The focus was on providing a well-equipped and enjoyable convertible experience at an affordable price point.
Chassis & Braking
The March C+C utilized a front-engine, front-wheel-drive layout. Suspension consisted of independent coil springs on both the front and rear axles, providing a comfortable ride quality. The front brakes were discs, offering good stopping power, while the rear brakes were drums, a cost-saving measure common in this class of vehicle. The car’s relatively narrow tires (185/50R16) contributed to fuel efficiency but limited grip during aggressive cornering. The chassis was reinforced compared to the standard hatchback to compensate for the loss of a fixed roof, but some body flex was still present. Stabilizer bars were included on both axles to reduce body roll during cornering.
Market Reception & Comparison
The Nissan March C+C 1.6 16V received mixed reviews from automotive critics. While the retractable hardtop was praised for its practicality and security, some reviewers noted the car’s modest performance and noticeable body flex. Fuel economy was generally considered good, with figures of around 42 US mpg on the extra-urban cycle. Compared to the 1.4-liter version, the 1.6L offered a more enjoyable driving experience, but at the cost of slightly reduced fuel efficiency. Compared to rivals like the Fiat Grande Punto Cabrio, the March C+C offered a unique combination of affordability and hardtop convenience. However, it lacked the more refined interior and driving dynamics of some competitors.
Legacy
The Nissan March C+C 1.6 16V, while not a high-volume seller, remains a relatively sought-after vehicle in the used car market, particularly among those looking for an affordable and unique convertible. The XH1 engine is generally considered reliable, although regular maintenance is essential. Common issues include wear and tear on the retractable hardtop mechanism and potential corrosion in areas exposed to the elements. The car’s simple mechanical design makes it relatively easy and inexpensive to repair. Today, the March C+C 1.6 16V represents a quirky and enjoyable alternative to more mainstream small convertibles, offering a unique blend of practicality, affordability, and open-air driving fun.



