2012-2015 Toyota Auris II 1.6 Valvematic (132 Hp) Multidrive S

The Toyota Auris II 1.6 Valvematic (132 hp) Multidrive S, produced between 2012 and 2015, represented a key offering in Toyota’s European C-segment hatchback lineup. Positioned as a mid-range trim, it aimed to balance fuel efficiency with acceptable performance, appealing to buyers seeking a practical and economical family car. This variant was a significant part of the E180 series Auris, built on the New Global Architecture (NGA) platform, and served as a bridge between the more basic 1.33L models and the more powerful, though less fuel-efficient, options. The Multidrive S transmission, Toyota’s continuously variable transmission (CVT), was a central feature of this configuration, designed to optimize fuel consumption and provide smooth acceleration.

Technical Specifications

Brand Toyota
Model Auris
Generation Auris II
Type (Engine) 1.6 Valvematic (132 Hp) Multidrive S
Start of production 2012
End of production 2015
Powertrain Architecture Internal Combustion engine
Body type Hatchback
Seats 5
Doors 5
Fuel consumption (economy) – urban (NEDC) 7.4 l/100 km (31.8 US mpg, 38.2 UK mpg, 13.5 km/l)
Fuel consumption (economy) – extra urban (NEDC) 4.8 l/100 km (49 US mpg, 58.9 UK mpg, 20.8 km/l)
Fuel consumption (economy) – combined (NEDC) 5.7 l/100 km (41.3 US mpg, 49.6 UK mpg, 17.5 km/l)
CO2 emissions (NEDC) 134 g/km
Fuel Type Petrol (Gasoline)
Acceleration 0 – 100 km/h 11.1 sec
Acceleration 0 – 62 mph 11.1 sec
Acceleration 0 – 60 mph 10.5 sec
Maximum speed 190 km/h (118.06 mph)
Emission standard Euro 5
Weight-to-power ratio 9.1 kg/Hp, 109.5 Hp/tonne
Weight-to-torque ratio 7.5 kg/Nm, 132.8 Nm/tonne
Power 132 Hp @ 6400 rpm
Power per litre 82.6 Hp/l
Torque 160 Nm @ 4400 rpm (118.01 lb.-ft. @ 4400 rpm)
Engine layout Front, Transverse
Engine Model/Code 1ZR-FAE
Engine displacement 1598 cm3 (97.52 cu. in.)
Number of cylinders 4
Engine configuration Inline
Cylinder Bore 80.5 mm (3.17 in.)
Piston Stroke 78.5 mm (3.09 in.)
Compression ratio 10.7:1
Number of valves per cylinder 4
Fuel injection system Multi-port manifold injection
Engine aspiration Naturally aspirated engine
Valvetrain DOHC, Valvematic
Engine oil capacity 4.2 l (4.44 US qt | 3.7 UK qt)
Coolant 5.8 l (6.13 US qt | 5.1 UK qt)
Kerb Weight 1205-1360 kg (2656.57 – 2998.29 lbs.)
Max. weight 1830 kg (4034.46 lbs.)
Max load 470-625 kg (1036.17 – 1377.89 lbs.)
Trunk (boot) space – minimum 360 l (12.71 cu. ft.)
Trunk (boot) space – maximum 1200 l (42.38 cu. ft.)
Fuel tank capacity 50 l (13.21 US gal | 11 UK gal)
Max. roof load 75 kg (165.35 lbs.)
Permitted trailer load with brakes (12%) 1300 kg (2866.01 lbs.)
Permitted trailer load without brakes 450 kg (992.08 lbs.)
Permitted towbar download 55 kg (121.25 lbs.)
Length 4275 mm (168.31 in.)
Width 1760 mm (69.29 in.)
Height 1460 mm (57.48 in.)
Wheelbase 2600 mm (102.36 in.)
Front track 1515-1535 mm (59.65 – 60.43 in.)
Rear (Back) track 1510-1535 mm (59.45 – 60.43 in.)
Minimum turning circle (turning diameter) 11 m (36.09 ft.)
Drivetrain Architecture The Internal combustion engine (ICE) drives the front wheels of the vehicle.
Drive wheel Front wheel drive
Number of gears and type of gearbox automatic transmission Multidrive S
Front suspension Independent, type McPherson with coil spring and anti-roll bar
Rear suspension Double wishbone
Front brakes Ventilated discs
Rear brakes Disc
Assisting systems ABS (Anti-lock braking system)
Steering type Steering rack and pinion
Power steering Electric Steering
Tires size 195/65 R15; 205/55 R16; 225/45 R17
Wheel rims size 6J x 15; 6.5J x 16; 7J x 17

Powertrain & Engine Architecture

The heart of this Auris variant is the 1ZR-FAE 1.6-liter inline-four engine. This engine utilizes Toyota’s Valvematic technology, a variable valve lift system that continuously adjusts the intake valve lift and timing to optimize engine efficiency and performance. Unlike traditional variable valve timing systems that only alter valve timing, Valvematic directly controls the lift amount, resulting in improved fuel economy and a broader torque curve. The engine employs multi-port fuel injection and a compression ratio of 10.7:1. The Multidrive S transmission is a CVT, offering stepless gear ratios. It simulates traditional automatic gear changes but provides a smoother, more efficient driving experience. It’s important to note that while marketed as an automatic, the Multidrive S operates differently than a conventional torque-converter automatic; it relies more on a belt-and-pulley system.

Driving Characteristics

The 1.6 Valvematic with the Multidrive S transmission delivers a comfortable, if not particularly sporty, driving experience. Acceleration from 0-60 mph takes around 10.5 seconds, and top speed is 190 km/h (118 mph). The CVT tends to hold the engine at its optimal RPM for efficiency, which can sometimes result in a “rubber band” feel during hard acceleration, where engine speed rises without a corresponding immediate increase in vehicle speed. Compared to the manual transmission versions of the 1.6L, the Multidrive S prioritizes fuel economy over outright performance. Higher-spec Auris models equipped with the 1.8L engine offered significantly more power and a more engaging driving experience, but at the cost of increased fuel consumption. The gear ratios in the Multidrive S are continuously adjusted to maintain optimal engine speed, contributing to its fuel efficiency.

Equipment & Trim Levels

The 1.6 Valvematic Multidrive S trim typically included standard features such as air conditioning, power windows, power mirrors, a CD player with auxiliary input, and ABS brakes. Higher trim levels added features like alloy wheels, a touchscreen infotainment system, rear parking sensors, and automatic climate control. Interior upholstery was generally cloth, with options for upgraded materials available. The dashboard layout was functional and straightforward, prioritizing ease of use over stylistic flair.

Chassis & Braking

The Auris II utilized a McPherson strut front suspension and a double wishbone rear suspension. This setup provided a comfortable ride quality, suitable for everyday driving. Braking consisted of ventilated discs at the front and solid discs at the rear. ABS was standard. Stabilizer bars were fitted to both the front and rear axles to reduce body roll during cornering. The weight of the vehicle, ranging from 1205 to 1360 kg depending on equipment, influenced the suspension tuning and braking performance.

Market Reception & Comparison

The Auris II 1.6 Valvematic Multidrive S was generally well-received by critics as a practical and economical family car. Its fuel economy of around 5.7 l/100 km (41.3 US mpg) was a major selling point. However, some reviewers found the CVT transmission to be less engaging than a traditional automatic or manual gearbox. Compared to the 1.33L Auris, the 1.6L offered noticeably more power and refinement. Against competitors like the Volkswagen Golf and Ford Focus, the Auris offered a competitive level of equipment and fuel efficiency, but often lacked the same level of driving dynamics.

Legacy

The 1ZR-FAE engine and Multidrive S transmission have proven to be relatively reliable powertrains. Common issues are generally limited to routine maintenance items, such as oil leaks and CVT fluid changes. The Multidrive S transmission requires regular fluid changes to maintain optimal performance and prevent premature wear. On the used car market, the Auris II 1.6 Valvematic Multidrive S represents a good value proposition for buyers seeking a reliable and fuel-efficient hatchback. Its reputation for dependability and low running costs continues to make it a popular choice.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top